O108 USB Charger

Charge your phone, GPS, camera & tablet with your weatherproof charger, on your motorcycle or up to 2m away from 12V supply connection.
 

FEATURES

• Connects to battery lead with industry standard SAE 2-pin connector – In-line seal makes 12V connection weatherproof!
• Charges 1x USB device with up to 3300mA current available (or get optional O-110 USB splitter and charge 2 devices)
• Weatherproof USB charge port easily zip-tie to handlebar, strut or even brake / clutch cable
• Built in protection turns off USB charging and prevents your parked vehicle’s battery from draining – Starts back up when vehicle engine fires up
• Monitors and displays parked vehicle’s battery status


SPECIFICATION

CHARGE CONNECTOR (INPUT): 2-pin SAE
CHARGE CONNECTOR (OUTPUT): 1x USB-A
POWER (OUTPUT): 3300mA @5V
POWER (INPUT): Vehicle 12V system with 12V lead-acid or 12.8V lithium battery
OPERATION:  Fully automatic
• Vehicle battery protection: Low input (<12.4V) auto-off protects vehicle battery from total discharge. Supply range: 12.4 to 16Vdc
• Turns on if vehicle battery voltage increases above 13.3V
• 2 LED battery monitor
• Short circuit, overheat, over-voltage protection
OPERATION (Voltage):
• USB ON - 13.3V to 18V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging battery
• USB 1 HOUR - 12.4V to 13.3V – 1 hour USB output, USB LED on. Go to standby mode after 1 hour or voltage < 12.4V
• STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3V
• AGM / LFP MONITOR - LED blink every 5 seconds if battery charge ≥ 50% , sufficient to start vehicle engine
• LED LFP: 13.1V to 13.3V
• LED AGM: 12.4V to 13.1V
•NO LED < 12.4V
• OFF ≤ 9V
CABLE RATING: SPT-1
USE: -20°C very low temperature, remains flexible at ‘below freezing’ temperatures
STYLE: Fully enclosed electronic circuitry with multiple LEDs, unique seal and cap design for USB socket ; use any USB cable, seals when inserted
WARRANTY: 3-year limited replacement warranty

NOTE: This product is primarily designed to be used when the engine is running.