OptiMate PRO-1 DUO, the professional combination battery charger-tester & power supply for powersport, small marine and light aircraft repair shops and battery retailers. Suitable for new or used 12V lead-acid batteries from 3-50Ah and 12.8V /13.2V LiFePO4 batteries from 2-20Ah.
Three selectable modes:
• Charge mode for 12V lead-acid batteries, including wet and AGM
• Charge mode for 12.8V LiFePO4 ("Lithium" LFP) batteries
• Power Supply mode for battery support during vehicle diagnostics, tuning or troubleshooting
Activate or prepare new batteries including:
• Lead-acid dry-charged AGM with separate acid pack
• Lead-acid factory activated AGM & GEL batteries
• LFP lithium batteries delivered in sleep mode and/or requiring a top-up charge
FEATURES
• Smart recovery mode for deep discharged batteries.
• Automatic fast battery activation and test: flashing green test light indicates battery is healthy and sufficiently charged.
• Advanced testing: quick identification of bad batteries and automatic retesting of a good battery after charge is complete. Test indication for GOOD (80 to 100%), OK (60 to 80%) and BAD (below 60%) batteries.
• Push button activated BMS reset for LiFePO4 batteries. Essential for "waking" new batteries shipped discharged.
• Power supply mode provides constant power for vehicle tuning, diagnostics and troubleshooting.
• Portable use - Vehicle hanging hook and wall receiver included.
SPECIFICATION
IDEAL FOR: PRO USE: 12V lead-acid STD & AGM from 3-50Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-20Ah.
NORMAL USE: 12V lead-acid STD & AGM from 3-240Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-120Ah.
CHARGING AMPS: 0.4A to 10A variable (Ampmatic)
CHARGING VOLTS: 12V lead-acid: 0.5V to 22V.
12.8V/13.2V Lithium LFP (LiFePO4): 0.5V to 14.4V
Power Supply: 11V to 13.6V
OPERATION: Selectable
STEPS: 11
USE: Indoor rating IP40
INPUT: Global (100-240V 50-60Hz), high efficiency
STYLE: Case with rubber bumbers, with wall-mount or hanger bars. AC Class 2 input socket, with ON/OFF switch, 15cm / 6" output cord
INCLUDED: Class II AC cord suitable for region, O43 charge lead extender 180cm and O14 fused battery clips.
Wall storage receiver and bar hanging hook
WARRANTY: 2-year limited repair/replacement warranty.
CERTIFICATION: CE, UKCA,NRTL (UL & CSA), PSE (Japan), SAA (Aus & NZ)
Manufacturer Part Number: TM650BS
Click HERE for the OptiMate PRO1 manual.
- Primary Application:
- Motorcycle
- Battery Type 1:
- Lead Acid
- Battery Type 2:
- Lithium
- Charger Series:
- PRO